Prizm L4-1800cc 1.8L DOHC (1993)
Oxygen Sensor: Service and Repair
Oxygen (O2S) Sensor Replacement
California
Oxygen Sensor
OXYGEN SENSOR (O2S) REPLACEMENT
Remove or Disconnect
1. Negative (-) battery cable.
2. O2S electrical connector.
3. Two nuts and 02S from vehicle.
Install or Connect
1. O2S to vehicle; secure with two nuts.
Tighten
^
O2S nuts to 41 Nm (30 lb.ft).
2. O2S electrical connector.
3. Negative (-) battery cable.
Tighten
^
Negative (-) battery cable-to-negative (-) battery terminal retainer to 15 Nm (11 lb.ft).
Federal
