Storm L4-1600cc 1.6L DOHC (1991)
For those vehicles which experience inoperative buckle assemblies, dealers will need to order buckle assemblies as listed. TO ENSURE EXACT
COLOR MATCH, BOTH BUCKLE ASSEMBLIES (DRIVER & PASSENGER) MUST BE ORDERED WHEN EITHER BUCKLE ASSEMBLY
REQUIRES REPLACEMENT.
SERVICE PROCEDURE
2.
FOR 1991 VEHICLES ONLY: Inspect BOTH front seat belt buckle assemblies for the lot number markings (See Figure 1) to determine if
involved in recall. Using a pen light will help with this inspection.
Steps number 4, 7, 8, 18, 19, 20, 21 and 24 (Switch removal and transfer), must also be performed when a Push Button Repair is performed on
1990-91 Geo Metro PASSENGER SIDE buckle. THESE STEPS IN YOUR ORIGINAL BULLETIN SHOULD BE MARKED TO INDICATE
BOTH SIDES NOT JUST DRIVERS SIDE AS PRINTED.
NOTE:
BUCKLES WITH DATE CODES PRIOR TO NOVEMBER, 1990 (STAMPED OY02) ARE INVOLVED AND WILL REQUIRE SERVICE,
CONTINUE WITH STEP 3.