Storm L4-1600cc 1.6L DOHC (1991)
Control Arm: Service and Repair
Fig. 4 Lower Control Arm Assembly
1.
Disconnect battery ground cable.
2.
Raise and support vehicle, then remove wheel and tire assembly.
3.
Remove stabilizer bar link to control arm assembly.
4.
Remove lower ball joint attaching nuts, Fig. 4.
5.
Remove control arm front bushing attaching bolt.
6.
Remove control arm rear bushing attaching bolts, then remove control arm assembly.
7.
Reverse procedure to install. Torque attaching nuts and bolt to specifications.