geo Workshop Repair Guides

Geo Workshop Service and Repair Manuals

Idle/Throttle Speed Control Unit > < Diagram Information and Instructions|Page 1400
Page 1
background image

Circuit Opening Relay: Description and Operation

The ECM controls "ON/OFF" operation of the fuel pump by turning it "ON" via the fuel pump relay under any of the following conditions:

-

For 2 seconds after ignition switch "ON."

-

While cranking engine (while engine start signal is received by the ECM).

-

The crank angle sensor signal is received by the ECM. 

Idle/Throttle Speed Control Unit > < Diagram Information and Instructions|Page 1400