Storm L4-1600cc 1.6L SOHC (1990)
Alignment: Service and Repair
Rear Wheel Alignment
Rear Camber Adjustment
Camber cannot be adjusted. Should camber be found out of specification, locate the cause and replace vehicle parts to correct the damage. If the body
or chassis is found to be damaged, the damaged area must be corrected to provide proper alignment.
Rear Toe Adjustment
1.
Loosen jam nuts on rear support rod.
2.
Turn hex screw in center to obtain proper toe angle.
3.
Tighten jam nuts. Torque jam nuts to 65 ft. lbs.
