Storm L4-1600cc 1.6L SOHC (1990)
Clutch: All Technical Service Bulletins
A/T - New Oil Pump to High Clutch Hub Shim Adjustment
Number:
90-2ll-7A
Section:
7A
Date:
April 1990
Corporate Bulletin:
037102
Subject:
OIL PUMP TO HIGH CLUTCH HUB SHIM ADJUSTMENT
Model and Year:
1990 R CAR
TO:
ALL CHEVROLET DEALERS
This bulletin is being written to correct the procedure when checking the Oil Pump to High Clutch Hub Shim Adjustment.
Step number 3 on Page 7A2-38 of the 1990 GEO Storm Service Manual should read:
3.
Place the J 35284-1 bridge and leg assembly, J 35284-19 bridge extension with J 35284-4 gage cylinder and a J 35284-32 high clutch gage pin on
the transaxle case (Figure 132).
The gasket should not be installed when performing this Adjustment.