Storm L4-1800cc 1.8L DOHC (1993)
Coolant Temperature Sensor/Switch (For Computer): Description and Operation
Engine Coolant Temperature Sensor
The coolant temperature sensor is a thermistor (a resistor which varies resistance inversely with a change of temperature) mounted in the engine coolant
stream. Low coolant temperature produces a high resistance (100,000 ohms at -40°C/-40°F) while high temperature causes low resistance 70 ohms at
130°C/266°F. The ECM supplies a 5.0 volts signal to the coolant sensor through a resistor in the ECM and measures the voltage. The voltage will be
high when the engine is cold, and low when the engine is hot. By measuring the voltage, the ECM knows the engine coolant temperature. Engine coolant
temperature affects most systems the ECM controls. A failure in the coolant sensor circuit should set a Code 14. Remember, these codes indicate a
failure in the coolant temperature circuit, so proper use of the chart will lead to either repairing a wiring problem or replacing the sensor, to properly
repair a problem.
