Storm L4-1800cc 1.8L DOHC (1993)
Alternator: Diagnostic Aids
Pull-to-Seat Connectors
Figure 20 - Typical Pull-To-Seat Connector
NOTE: The following general repair procedures can be used to repair most types of connectors. Use the Pick(s) or Tools that apply to your terminal.
Use Terminal repair kit J 38125 or equivalent. The steps are illustrated with typical connectors. Your connector may be different, but the repair steps are
similar. Some connectors DO NOT require all the steps shown. Skip the steps that DO NOT apply.
Figure 21
Figure 22
1. Separate connector halves. Using the proper pick or removal tool, remove terminal (see Figures 21 & 22).
a. Pull lead gently.
b. Insert pick from front of connector into canal.
c. Pry tab up with tool.
d. Push lead to remove.
