geo Workshop Repair Guides

Geo Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3225 > < Brake Warning Indicator, ABS|Page 3222
Page 1
background image

Brake Warning Indicator: Initial Inspection and Diagnostic Overview

PROCEDURE

1. Check the IG-COIL METER Fuse by starting the vehicle.
2. Check that the brake fluid level is adequate.
3. Check that the parking brake is fully released.
4. Check that the brake pipes and hoses are securely fastened and not leaking.
5. Check that grounds G104, G2OO and G2O1 (Federal Emissions) or G108, G109 and G202 (California Emissions) are clean and tight.

Initial Inspection and Diagnostic Overview|Page 3225 > < Brake Warning Indicator, ABS|Page 3222