Tracker 4x2 L4-1.6L SOHC TBI (1994)
Cruise Control Switch: Testing and Inspection
Cruise Main Switch
Fig. 7 Cruise Control Unit Resistance Test.
1. Connect 12 volts battery positive power to terminal 3 of cruise main switch and negative to terminal 5, Fig. 7.
2. Connect positive terminal of circuit tester to terminal 1 and negative to terminal 5.
3. Turn cruise switch on, circuit tester should read 10-14 volts.
4. Turn cruise switch off, voltage should read 0-1 volt.
5. If voltage is not as specified, replace switch.
