Tracker 4x2 L4-1.6L SOHC TBI (1994)
Valve Clearance: Specifications
Engine Liter/CID .................................................................................................................................................................................................. 1.6L/4-97
All specifications given in inches.
Stem Diameter Std.
Intake ......................................................................................................................................................................................................... 0.2742-0.2748
Exhaust ...................................................................................................................................................................................................... 0.2737-0.2742
Guide Protrusion ........................................................................................................................................................................................................... 0.55
Maximum Tip Refinish ................................................................................................................................................................................................. [03]
Face Angle ................................................................................................................................................................................................................. 45 deg.
Margin [01]
Intake ....................................................................................................................................................................................................................... 0.039
Exhaust ..................................................................................................................................................................................................................... 0.039
Valve Lash ...................................................................................................................................................................................................................... [09]
[01] Minimum.
[03] Grind only enough to provide true surface. After grinding valve stems, ensure sufficient clearance remains between rocker arm & valve spring cap
or rotator.
[09] With engine at normal operating temperature: intake, 0.0090-0.0110 inch; exhaust, 0.0102-0.0114 inch.
