Tracker 4x2 L4-1.6L SOHC TBI (1994)
5. Remove side bearing adjusters and outer bearing races.
6. Remove rear wheel speed sensor.
7. Remove 10 ring gear assembly attaching bolts.
8. Separate differential left case with rear wheel anti-lock brake exciter ring from right case.
9. Remove exciter ring from left case using a suitable copper hammer. Tap evenly along the outer edge of exciter ring.
10. Turn differential carrier in fixture 90°.
Fig. 11 Universal Joint Flange Removal.
11. Using pinion flange holder J-8614-01, or equivalent, remove universal joint flange nut, Fig. 11.
12. Remove universal joint flange and pinion shaft.
13. Using oil seal remover tool No. J-26941 and slide hammer tool No. J-23907, or equivalents, remove pinion shaft oil seal.
14. Remove outer pinion bearing from differential case.
15. Remove outer and inner pinion bearing races.
