Tracker 4x2 L4-1.6L SOHC TBI (1994)
Fig. 7 Bearing Preload Adjustment.
8. Measure differential left-side gear endplay using a suitable dial indicator and universal endplay measuring tool No. J-35138, or equivalent, Fig. 7.
If end play is not 0.005-0.014 inch, select shim to obtain correct end play.
9. Coat ring gear bolts with sealant part No. 1052624, or equivalent, then install bolts and torque to 63 ft. lbs.
10. Install differential right side bearing, using bearing cone installer tool No. J-24433, driver handle tool No. J-8092, or equivalents and a suitable
press.
11. Install differential left side bearing, using bearing cone installer tool No. J-37758, driver handle tool No. J-8092, or equivalents and a suitable
press.
12. Install bearing plug tool No. J-8107-4, or equivalent, on lower bearing to protect side bearing from damage.
13. Using inner bearing race installer tool No. J-37759 and driver handle tool No. J-8092, or equivalents, install pinion gear inner race.
14. Using outer bearing race installer tool No. J-37758 and driver handle tool No. J-8092 or equivalents, install pinion gear outer bearing race.
15. Set pinion depth as follows:
a. Lubricate inner and outer pinion bearings with GM part No. 1050010 or equivalent lubricant.
