Tracker 4x2 L4-1.6L VIN 6 (1995)
Evaporative Emission Control Canister: Service and Repair
EVAPORATIVE EMISSION (EVAP) CANISTER REPLACEMENT
REMOVE OR DISCONNECT
1. Negative (-) battery cable.
2. One clamp and two vacuum hoses from Evaporative Emission (EVAP) canister.
3. Two bolts, EVAP canister and mounting bracket from engine compartment.
4. One screw and EVAP canister from mounting bracket.
INSTALL OR CONNECT
1. EVAP canister to mounting bracket; secure with one screw.
2. EVAP canister and mounting bracket to engine compartment; secure with two bolts. Tighten EVAP canister bolts to 15 Nm (11 lb. ft.).
3. Two vacuum hoses to EVAP canister, secure with one clamp.
4. Negative (-) battery cable. Tighten Negative (-) battery cable-to-negative (-) battery terminal retainer to 15 Nm (11 lb. ft.).
