Tracker 4x2 L4-1.6L VIN 6 (1995)
Fuel Injection Installation
INSTALL OR CONNECT
1. Replace fuel injector O-ring with new ones taking care not to damage them.
2. Grommets to fuel injectors.
Inspect
Insulators for breakage or scoring. If damaged, replace insulator(s).
Insulators And Cushions Installation
3. Insulators and cushions to intake manifold.
4. Apply thin coat of fuel to O-rings. Install injectors to fuel rail and then the whole assembly to the intake manifold.
NOTICE: Make sure that the fuel injectors rotate smoothly. If not, probable cause is an incorrectly installed O-ring, replace with a new one.
