Tracker 4x2 L4-1.6L VIN 6 (1995)
5. Three bolts to fuel rail. Tighten three fuel rail bolts to 18-28 Nm (13-20 lb. ft.).
NOTICE: Make sure that the fuel injectors rotate smoothly.
Installing Fuel Pressure Regulator
6. Fuel feed pipe, fuel pulsation damper and new gasket to fuel rail.
NOTICE: Apply thin coat of engine oil to new gaskets.
Tighten fuel pulsation damper to 25-35 Nm (18.5-25 lb. ft.).
7. Fuel pressure regulator; secure with two bolts. Tighten fuel pressure regulator bolts to 8-12 Nm (6-8.5 lb. ft.).
8. Four fuel injector connectors.
9. EGR pressure transducer bracket to intake manifold; secure with two bolts. Tighten EGR pressure transducer bracket bolts to 23 Nm (17 lb. ft.).
10. EGR pressure transducer to EGR pressure transducer bracket.
11. Throttle body. Refer to Throttle Body Replacement.
