Tracker 4x2 L4-1.6L VIN 6 (1995)
Tank Pressure Control Valve: Service and Repair
2-Way Check Valve
TANK PRESSURE CONTROL VALVE REPLACEMENT
REMOVE OR DISCONNECT
1. Fuel tank from vehicle.
2. Two clamps and fuel vapor hoses from Tank Pressure Control (TPC) valve.
3. Two screws and TPC valve from fuel tank.
INSPECT
1. Connect a length of hose to black side of TPC valve.
2. Blow into hose; air should pass through the TPC valve.
3. Remove hose from black side and connect it to the orange side of the TPC valve.
4. Blow into hose; air should not pass through the TPC valve.
NOTE: If the TPC valve does not pass the above tests, replace the TPC valve.
INSTALL OR CONNECT
1. TPC valve to fuel tank; secure with two screws.
2. Fuel vapor hoses to TPC valve; secure with two clamps.
3. Fuel tank to vehicle.