Tracker 4x2 L4-1.6L VIN 6 (1995)
Igniter: Service and Repair
IGNITER REPLACEMENT
REMOVE OR DISCONNECT
1. Negative (-) battery cable.
2. Igniter electrical connector.
3. Two screws and igniter from ignition coil mounting bracket.
INSTALL OR CONNECT
1. Igniter to ignition coil mounting bracket; secure with two screws.
2. Igniter electrical connector.
3. Negative (-) battery cable. Tighten negative (-) battery cable-to-negative (-) battery terminal retainer to 15 Nm (11 lb. ft.).
