Tracker 4x2 L4-1590cc 1.6L (1991)
14.
Install the NEW button onto the buckle assembly. Depress the release button and hold. Hook the end of the latch spring to the latch plate using a
small screwdriver (see Figure 9).
15.
Check operation of the button and that the spring is attached correctly by pressing the button several times to confirm free travel.
16.
TEST the operation of the buckle. Insert seat belt latch plate into buckle and check to see that it latches properly by tugging on the seat belt latch
plate while firmly holding the buckle. Repeat this step three (3) times. If it DOES NOT latch, the buckle assembly should be replaced.