Tracker 4x2 L4-1590cc 1.6L (1991)
Wiper Motor: Testing and Inspection
Fig. 6 Front wiper motor Lo & Hi speed test
Fig. 7 Front wiper motor auto stop test
FRONT
Lo & Hi Speed
1.
Connect battery positive to wiper motor BLU terminal and battery negative to BLK lead, Fig. 6. Motor should run 45-55 RPM.
2.
Connect battery positive to wiper motor BLU/RED terminal and battery negative to BLK lead, Fig. 6. Motor should run 68-78 RPM.
Auto Stop
1.
Connect battery positive to wiper motor YEL/BLU terminal and battery negative to BLK lead, Fig. 7.
2.
Jumper BLU/WHT terminal to BLU terminal, Fig. 7. Motor should stop at a given position conforming to start position. Repeat this step several
times to ensure motor stops in same position.
Fig. 8 Rear wiper motor test