Tracker 4x4 L4-16L SOHC TBI (1994) - Fuel Injector Component Information - TSB
NOTE: Make sure to fit the injector wire harness into the groove in the throttle body securely and do NOT apply force to the wire harness to
injector connection.
3. Injector cover and tighten screws to 3.5 Nm (31 in lbs).
4. Fuel feed pipe to throttle body after applying a thin coat of engine oil to the O-ring and tighten to 46 Nm (33 ft lbs).
5. Air intake case and tighten nuts and bolts to17 Nm (13 ft lbs).
6. Negative battery cable.
7. Turn ignition switch to "ON" and then back to "LOCK" to pressurize the fuel system. Check for any fuel leaks.
