Tracker 4x4 L4-1.6L VIN 6 (1995)
Brake Master Cylinder: Service and Repair
Master Cylinder Disassembly/Assembly
Fig. 7 Exploded View Of Master Cylinder. Tracker Models
1.
Remove master cylinder from vehicle.
2.
Remove pressure limit valve and proportioning/differential valve, if equipped.
3.
Depress primary piston, then remove snap ring.
4.
Remove primary piston stopper, cylinder cup and plate, then the primary piston.
5.
Remove secondary stopper bolt.
6.
Remove secondary piston assembly by applying small amount of air pressure to stopper bolt hole.
7.
Remove secondary return spring.
8.
Reverse procedure to assemble, noting the following:
a.
Inspect cylinder bore for scoring and corrosion. Replace master cylinder if necessary.
b.
Clean all metal parts in denatured alcohol.
c.
Clean all rubber parts in clean brake fluid.
d.
Polish discolored or stained cylinder with crocus cloth, then rinse in clean brake fluid. Ensure compensating port is clean.
