Tracker 4x4 L4-1.6L VIN 6 (1995)
1. Slide in J 36049 into compressor shaft.
2. Lubricate seal with PAG compressor oil.
Installing Compressor Shaft Seal
3. Attach J 41387 to a new compressor shaft seal, use tool to slide shaft seal into compressor.
NOTICE: Do not use a press, hammer or other similar tool to press tool J 41387 with shaft seal into place. Damage to the compressor or
compressor shaft seal may occur.
4. New snap ring using snap ring pliers.
5. Key into shaft groove.
6. New oil felt and retainer inside the bore.
7. A/C compressor clutch.
