Tracker 4x4 L4-1.6L VIN 6 (1995)
FUEL FEED, RETURN AND VAPOR PIPES AND HOSES REPAIR AND REPLACEMENT
PRELIMINARY STEPS
^
Relieve fuel system pressure. Refer to Fuel System Pressure Relief Procedure.
^
Raise and suitably support vehicle.
REMOVE OR DISCONNECT
1. One clamp and fuel return hose from fuel return pipe by fuel tank.
2. One bolt and fuel feed outlet hose from fuel feed pipe by fuel tank.
3. One clamp and fuel vapor hose from fuel vapor pipe by fuel tank.
4. One bolt and fuel feed hose from fuel feed pipe in engine compartment.
5. One clamp and fuel return hose from fuel return pipe in engine compartment.
6. One clamp and fuel vapor hose from fuel vapor pipe in engine compartment.
7. Ten pipe retaining clamps and fuel pipes from underbody.
INSTALL OR CONNECT
1. Fuel pipes to underbody; secure with ten pipe retaining clamps.
2. Fuel vapor hose to fuel vapor pipe in engine compartment; secure with one clamp.
3. Fuel return hose to fuel return pipe in engine compartment; secure with one clamp.
4. Fuel feed hose to fuel feed pipe in engine compartment; secure with one bolt. Tighten fuel feed hose-to-fuel feed pipe bolt to 45 Nm (33 lb. ft.).
5. Fuel vapor hose to fuel vapor pipe by fuel tank; secure with one clamp.
6. Fuel feed outlet hose to fuel feed pipe by fuel tank; secure with one bolt. Tighten fuel feed outlet hose-to-fuel feed pipe bolt to 45 Nm (33 lb. ft.).
7. Fuel return hose to fuel return pipe by fuel tank; secure with one clamp. Lower vehicle.
8. Negative (-) battery cable.
