Tracker 4x4 L4-1590cc 1.6L (1993)
Throttle Body: Service and Repair
Throttle Body And Intake Exploded View
REMOVAL:
1.
Relieve fuel system pressure. Refer to MAINTENANCE PROCEDURES/FUEL SYSTEM PRESSURE RELIEF.
2.
Disconnect the negative battery terminal.
3.
Drain engine coolant.
4.
Remove air cleaner and air box assembly.
5.
Disconnect the accelerator cable.
6.
Disconnect kick-down cable if equipped.
7.
Disconnect the cruise control cable if equipped.
8.
Disconnect the two electrical connectors.
9.
Disconnect coolant hose from air valve.
10.
Disconnect all vacuum hoses.
11.
Remove the fuel pressure line and clamp hold down to throttle body.
12.
Disconnect the fuel return line at the pressure regulator.
13.
Remove the four fasteners holding the throttle body to the intake manifold.
14.
Disconnect the PCV hose at the throttle body.
15.
Remove the throttle body from intake manifold.
DISASSEMBLY:
NOTE:
a.
Be sure to replace gaskets and o-rings as well as worn or damaged parts.
b.
While disassembling and assembling the throttle body, use special care NOT to deform levers on the throttle valve shaft or cause damage to any
other parts.
