Tracker 4x4 L4-1590cc 1.6L (1993)
Steering Gear: Service and Repair
Removal/Installation
1.
Disconnect battery ground cable.
2.
On models with power steering, proceed as follows:
a.
Remove coolant reservoir from radiator bracket.
b.
Remove and plug pressure hose from power steering gear.
c.
Remove return hose from oil tank.
3.
On all models, disconnect steering column shaft from steering gear.
4.
Raise and support vehicle.
5.
Disconnect center link from pitman arm using Pitman Arm Puller tool No.J29107 for power steering and tool No. J21687-02 for manual steering.
6.
Remove steering gear retaining bolts and steering gear.
7.
Note alignment then remove pitman arm from steering gear.
8.
Reverse procedure to install.
