Tracker 4x4 L4-1590cc 1.6L (1993)
Steering Wheel: Service and Repair
1.
Disconnect battery ground cable.
2.
Remove horn button, then steering wheel shaft nut. Scribe marks on the steering wheel and steering shaft to use as a guide for reinstallation.
3.
Remove steering wheel using puller No. J1895-03 or equivalent.
4.
Remove horn button contact plate screws from rear of steering wheel, then disconnect wire attached to horn contact plate, then remove contact
plate.
5.
Reverse procedure to install. Align scribe marks on steering wheel and steering shaft. Torque steering shaft nut to 24 ft. lbs.
