Tracker 4x4 L4-1590cc 1.6L (1993)
Seals and Gaskets: Service and Repair
Fig. 8 Axle Shaft Bearing & Seal
1.
Remove axle shaft referring to AXLE SHAFT.
2.
Remove oil seal, using plain screwdriver, Fig. 8.
3.
Remove circlip.
4.
Remove bearing form housing using bearing removal tool Nos. J29369-1 and J23907.
5.
Reverse procedure to install noting the following:
a.
Install bearing using bearing installation tool No. J8092.
b.
Install oil seal with oil seal installation tool Nos. J37770 and J8092.
