Acadia AWD V6-3.6L (2008)
5. Place the suction hose fitting or suction hose side of the manifold into the installation tool fixture J-44551-5 (3) so it is supported by the tools legs.
Important: Correct placement of the J-44551-5 is critical.
6. Lubricate the A/C suction screen with the applicable refrigerant oil.
7. Align the screen (2), basket first; into the suction hose bore then hand tighten the bolt until contact is made between the hose, screen and tool.
8. Turn the bolt of the installation tool clockwise pressing the screen into the bore until the mandrel shoulder contacts the end of the hose fitting.
9. Unscrew the bolt and remove the installation tool from the hose or manifold.
Important: Clean the surface to be used for attaching the label.
10. Install the J-44551-1 Suction Screen Notification Label.
11. Install the A/C hose to the A/C compressor.
Suction Screen Replacement
Suction Screen Replacement
Tools Required
J 44551 Suction Screen Kit
Removal Procedure
Important: Suction screens are intended to be installed in the suction hose after a major compressor failure.
1. Remove the A/C suction hose from the A/C compressor.
2. Using the J-44551-9 Universal Removal Tool, place the tip of the tool under the inside edge of the compression band of the suction screen and the
cushioning fulcrum pad against the open end of the hose or manifold fitting.
