Acadia FWD V6-3.6L (2007)
Note
Approximate size of the tie strap should be 4.5 mm (0.177 in) width and 300 mm (12 in) length.
3. Install tie straps (1) , obtained locally, into each of the drilled holes. Route the strap through the larger holes in the armrest reinforcement and
secure as shown above.
4. Ensure that the tie straps are snug and are pulling the pull cup pocket upward, closing the gap to the armrest. Trim off the extra length of the tie
wraps.
5. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement - Left Side (Acadia) or Front Side Door Trim Panel Replacement -
Right Side (Acadia) in SI.
Warranty Information
For vehicles repaired under warranty, use the table above.
Disclaimer
