Acadia FWD V6-3.6L (2007)
Rear Door Weatherstrip: Service and Repair
Rear Door Opening Weatherstrip Replacement
Rear Door Opening Weatherstrip Replacement
Removal Procedure
1. Remove the rear door sill plate.
2. Remove the weatherstrip (1) from the pinch-weld flange.
Installation Procedure
1. Align the weatherstrip (1) to the door opening with the bond joint positioned at the lower center of the door opening.
2. Install the weatherstrip to the pinch-weld flange. Ensure the weatherstrip is fully seated.
3. Install the rear door sill plate.