gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Interior - Power Seat Track Moves/Feels Loose|Page 19144 > < Seats - Manual Seat Adjuster Bumpy Or Jerky/Won't Adjust|Page 19139
Page 1
background image

Seat Track: All Technical Service Bulletins
Interior - Power Seat Track Moves/Feels Loose

TECHNICAL

Bulletin No.: 08-08-50-002B

Date: November 30, 2010

Subject: Power Seat Track Moves/Loose Feeling (Chucking) (Replace Front Lift Link Bolt)

Models:

2008 Buick Enclave Built Prior to June 2007
2007 GMC Acadia
2007 Saturn OUTLOOK

Supercede:
This bulletin is being revised to provide part number to allow ordering through GMCC&A. Please discard Corporate Bulletin Number 08-08-50-002A
(Section 08 - Body and Accessories).

Condition

Some customers may comment that the power front seat track moves or has a loose feeling.

Cause

This condition may be caused by the shoulder of the bolt.

Correction

Replace the front lift link bolt. Follow the procedure below.

1. Measure from the floor to the bottom of the plastic seat front finish panel 79.4 mm (3-1/8 in). If not placed in this position, the seat link lift bolt

cannot be removed.

2. Remove the seat. Refer To Bucket Seat Replacement in SI.
3. Remove the plastic seat trim. Refer to Front Seat Front Finish Panel Replacement in SI.
4. Disengage the J channel retainers from all the sides of the seat cushion frame and lift up the cushion.

Interior - Power Seat Track Moves/Feels Loose|Page 19144 > < Seats - Manual Seat Adjuster Bumpy Or Jerky/Won't Adjust|Page 19139