Acadia FWD V6-3.6L (2007)
Cowl Moulding / Trim: Recalls
Campaign - Engine Compartment Water Instrusion
Subject:
Service Update for Inventory and Customer Vehicles-Air Inlet Panel to Windshield Gap-Water Intrusion into Engine Compartment-Expires with Base
Warranty
# 07008 - (02/15/2007)
Models:
2007 GMC Acadia
2007 Saturn Outlook
THIS SERVICE UPDATE INCLUDES VEHICLES IN DEALER/RETAILER INVENTORY AND CUSTOMER VEHICLES THAT RETURN FOR
ANY TYPE OF SERVICE, AND WILL EXPIRE AT THE END OF THE INVOLVED VEHICLE'S NEW VEHICLE LIMITED WARRANTY
PERIOD.
Purpose
This bulletin provides a service procedure to eliminate an area of possible water intrusion into the engine compartment. There may be a gap between the
air inlet and the windshield that could allow water to run into the engine compartment, causing the engine to run rough or misfire.
This service procedure should be completed as soon as possible on involved vehicles currently in dealer/retailer inventory and customer vehicles that
return to the dealer/retailer for any type of service during the New Vehicle Limited Warranty coverage period.
Vehicles Involved
A list of involved vehicles currently in dealer/retailer inventory is attached to the Administrative Message (GM and Saturn US) or Dealer
Communication (Canada) used to release this bulletin. Customer vehicles that return for service, for any reason, and are still covered under the vehicle's
base warranty, and are within the VIN breakpoints provided below, should be checked for vehicle eligibility in the appropriate system listed below.
Important:
Dealers/retailers are to confirm vehicle eligibility prior to beginning repairs by using the system(s) below. Not all vehicles within the above
breakpoints may be involved.
-- GM dealers and Canadian Saturn retailers should use GMVIS.
-- US Saturn retailers should use the AS/400 system.
Parts Information - GM and Saturn Canada
Parts required to complete this service update are to be obtained from General Motors Service Parts Operations (GMSPO). Please refer to your
"involved vehicles listing" before ordering parts. Normal orders should be placed on a DRO = Daily Replenishment Order. In an emergency situation,
parts should be ordered on a CSO = Customer Special Order.
If you do not already have an equivalent rust preventative lubricant on hand, you may place an order to GMSPO. This is the same lubricant used in
Product Enhancement bulletin 06224.
