Acadia FWD V6-3.6L (2007)
Body / Frame Mount Bushing: Service and Repair
Rear Frame Cushion or Insulator Replacement
Rear Frame Cushion or Insulator Replacement
Tools Required
J-45725 Frame Bushing Installer
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
Important: Whenever the frame is moved in relation to the body, disconnect the intermediate shaft from the steering gear stub shaft.
2. Disconnect the intermediate shaft from the steering gear stub shaft.
3. Install a jackstand under the center of the frame, between the rear frame insulators.
Important: In order to remove any frame insulator, loosen the adjacent frame insulator to permit the frame to separate from the body.
Use caution when lowering or tilting the frame to prevent damage to other components.
