Acadia FWD V6-3.6L (2007)
Tighten the bolts to 110 N.m (81 lb ft) plus 90 degrees.
5. Install the front crossmember brace bolts (3).
Tighten the bolts to 50 N.m (37 lb ft).
6. Install the lower 2 bolts to the upper bumper support.
Tighten the bolts to 9 N.m (80 lb in).
7. Install the power steering cooler (1).
8. Install the power steering cooler nuts (2).
9. Lower the vehicle.
10. Untie the condenser radiator fan module from the upper bumper support.
11. Install the front bumper fascia.
Rear Suspension Support Crossmember Replacement (All Wheel Drive)