gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Sensors and Switches - Body and Frame > < Interior - Power Seat Track Moves/Feels Loose|Page 20914
Page 1
background image

Seat Track: All Technical Service Bulletins
Interior - Jerky/Bumpy Power Seat Operation

TECHNICAL

Bulletin No.: 07-08-50-016C

Date: March 02, 2010

Subject: Power Seat Feels Bumpy or Jerky When Moved Fore or Aft (Replace Lower Seat Track Assembly)

Models:

2008-2010 Buick Enclave 
2007-2010 GMC Acadia
2007-2010 Saturn OUTLOOK 
All Built Prior to September 1, 2009

Supercede:
This bulletin is being revised to add the 2010 model year as well as to update the parts and warranty information. Please discard Corporate Bulletin
Number 07-08-50-016B (Section 08 - Body and Accessories).

Condition

Some customers may comment that when moving the driver's seat fore or aft, the seat moves in a bumpy or jerky manner. Replace only the driver's seat
track if the concern is not for both seats. The passenger seat may also be experiencing the same concern. Replace the passenger side component only if it
is a customer concern.

Cause

The seat track bearings ride on the bearing races, which may have not properly mated. The bearings may take a set when the seat is stationary.

Correction

The lower seat track assembly service part has been released to correct this condition. Install the updated lower seat track assembly. Refer to the Driver
or Passenger Seat Adjuster Track Replacement procedure in SI.

Parts information

Warranty Information

For vehicles repaired under warranty, use the table above.

Disclaimer

Sensors and Switches - Body and Frame > < Interior - Power Seat Track Moves/Feels Loose|Page 20914