Acadia FWD V6-3.6L (2007)
Parking Brake Pedal: Service and Repair
Park Brake Pedal Assembly Replacement
Removal Procedure
1. Remove the left side instrument panel insulator panel.
2. Remove the driver side front carpet retainer.
3. Disconnect the park brake warning indicator switch electrical connector.
4. Raise and support the vehicle.
5. Loosen the park brake cable locknut (1) at the equalizer to relieve tension on the park brake cable.
6. Disconnect the front park brake cable from the park brake pedal clevis (1).
7. Remove the front park brake cable from the park brake pedal assembly by compressing the locking tabs on the cable conduit (2).
