Acadia FWD V6-3.6L (2007)
Parking Brake Shoe: Testing and Inspection
Park Brake Shoe Inspection
Caution: Refer to Brake Dust Caution.
1. Raise and support the vehicle.
2. Remove the tire and wheel assembly.
3. Remove the rear brake caliper bracket with the rear brake caliper.
Important: DO NOT apply the park brake pedal with the rotors removed.
4. Remove the rear brake rotor.
5. Inspect and replace the park brake shoe and lining if any of the following conditions are found:
^
Excessive wear indicated by the park brake lining being worn down to the shoe
^
Park brake lining cracking
^
Oil or fluid contamination of the park brake lining
6. Adjust the park brake shoe.
7. Install the rear brake rotor.
8. Install the rear brake caliper with the rear brake caliper bracket.
9. Install the tire and wheel assembly.
10. Lower the vehicle.
