Acadia FWD V6-3.6L (2007)
8. Tighten the right exhaust camshaft position actuator bolt.
Tighten the bolt to 58 Nm (43 lb ft).
9. Install the right intake and exhaust camshaft position actuator solenoids. See: Variable Valve Timing Solenoid/Service and Repair
10. Install the right intake and exhaust camshaft position sensors. See: Powertrain Management/Computers and Control Systems/Camshaft Position
Sensor/Service and Repair
11. Install the right camshaft cover. See: Cylinder Head Assembly/Valve Cover/Service and Repair
12. Install the lower intake manifold. See: Intake Manifold/Service and Repair
