Acadia FWD V6-3.6L (2007)
Heat Shield: Service and Repair
Exhaust Manifold Heat Shield Replacement - Left Side
Exhaust Manifold Heat Shield Replacement - Left Side
Removal Procedure
Caution: Refer to Exhaust Service Caution.
Caution: Refer to Protective Goggles and Glove Caution.
1. Remove the fuel injector sight shield.
2. Disconnect the engine wiring harness electrical connector (2) from the heated oxygen sensor (HO2S) electrical connector (3).
3. Remove the HO2S electrical connector retainer from the engine wiring harness clip (1).
4. Remove the exhaust manifold heat shield bolts (1).