Acadia FWD V6-3.6L (2007)
8. Install liquid line bracket bolt to upper tie bar support (2).
Tighten the bolt to 9 N.m (80 lb in).
9. Install the liquid line bracket nuts along frame rail and plenum panel (1).
Tighten the bolt to 4 N.m (35 lb in).
10. Install the right headlamp assembly.
11. Install the fascia grille.
12. Evacuate and recharge the refrigerant system. Refer to Refrigerant Recovery and Recharging.
13. Leak test the fittings of the component using J 39400-A.
