Acadia FWD V6-3.6L (2007)
8. Install liquid line bracket bolt to upper tie bar support (2).
Tighten the bolt to 9 N.m (80 lb in).
9. Install the liquid line bracket nuts along frame rail and plenum panel (1).
Tighten the bolt to 4 N.m (35 lb in).
10. Install the right headlamp assembly.
11. Install the fascia grille.
12. Evacuate and recharge the refrigerant system. Refer to Refrigerant Recovery and Recharging.
13. Leak test the fittings of the component using J 39400-A.
Suction Hose Replacement
Suction Hose Replacement
Tools Required
J 39400-A Halogen Leak Detector
Removal Procedure
1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the right front wheel house liner.
4. Remove the right front engine splash shield.