Acadia FWD V6-3.6L (2007)
Alignment: Service and Repair
Rear Toe Adjustment
Rear Toe Adjustment
Important: Make any adjustments to camber before setting toe.
Important: Left side toe adjustment is shown, right side toe adjustment is similar.
1. Loosen the adjuster nut (1).
2. Using a wrench to rotate the adjuster bolt (2), adjust the cam (3) to specifications.
Important: Ensure that the toe settings have not changed after torquing the adjuster nut to specifications. Readjust if necessary.
Notice: Refer to Fastener Notice.
3. Using a wrench to hold the adjuster bolt (2), tighten the adjuster nut (1).
Tighten the nut to 140 N.m (103 lb ft).
4. Check the toe alignment and adjust if required.
5. Test drive the vehicle.
