Acadia FWD V6-3.6L (2007)
5. Install the auxiliary A/C evaporator tubes (2) to the HVAC module (4) and install retaining nut (1).
Tighten the nuts to 16 N.m (12 lb ft).
6. Install auxiliary evaporator tubes to retaining clips and install nuts (3) to secure.
Tighten the nuts to 4 N.m (35 lb in).
7. Install the right rear inner wheelhouse liner if necessary.
8. Lower the vehicle.
9. Recharge the refrigerant to the system. Refer to Refrigerant Recovery and Recharging.
10. Leak test the fittings of the component using the J 39400-A.
Discharge Hose Replacement
Discharge Hose Replacement
Tools Required
J 39400-A Halogen Leak Detector
Removal Procedure
1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the right front wheel house liner.
4. Remove the right front engine splash shield.
5. Remove right headlamp assembly.
6. Remove the Fascia Grille.
