Acadia FWD V6-3.6L (2007)
Power Steering Line/Hose: Service and Repair
Power Steering Gear Inlet Pipe/Hose Replacement
Power Steering Gear Inlet Pipe/Hose Replacement
Removal Procedure
1. Remove the right side catalytic convertor.
2. Remove as much power steering fluid from the remote power steering fluid reservoir as possible.
3. Place drain pans under the vehicle as needed.
4. Disconnect the power steering fluid reservoir outlet hose from the power steering pump.
5. Unclip the power steering fluid reservoir outlet hose from the power steering gear inlet hose bracket.
6. Remove the power steering gear inlet hose bracket bolt (1).
7. Remove the power steering gear inlet hose bracket nut (2).