Acadia FWD V6-3.6L (2007)
3. Insert the sensor in the wheel hole with the air passage facing away from the wheel.
Notice: Refer to Fastener Notice.
4. Install the sensor nut and position the sensor body parallel to the inside wheel surface while torquing.
Tighten the sensor nut to 7 N.m (62 lb in).
Important: Before installing the tire on the wheel, note the following items to avoid tire pressure sensor damage upon tire mounting:
^
Position the mounting/dismounting head 180 degrees from the valve stem.
^
Position the bead transition area 45 degrees counterclockwise of the valve stem.
^
Using the tire machine, rotate the tire/wheel assembly clockwise when transferring the tire bead to the inside of the wheel rim.
^
Repeat items for outer bead.
Install the tire on the wheel.
5. Install the tire/wheel assembly on the vehicle.
6. Lower the vehicle.
