Acadia FWD V6-3.6L (2007)
Variable Valve Timing Solenoid: Service and Repair
Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 1 (Right Side) Exhaust
CAMSHAFT POSITION ACTUATOR SOLENOID VALVE SOLENOID REPLACEMENT - BANK 1 (RIGHT SIDE) EXHAUST
Removal Procedure
1. Disconnect the engine wiring harness electrical connector (5) from the bank 1 exhaust camshaft position (CMP) actuator solenoid valve.
2. Remove the CMP actuator solenoid valve bolt and valve (1).
3. Inspect the CMP actuator solenoid valve seal and replace as necessary.
Installation Procedure
