Acadia FWD V6-3.6L (2007)
Fuel Supply Line: Service and Repair
Fuel Hose/Pipes Replacement - Chassis
FUEL HOSE/PIPES REPLACEMENT - CHASSIS
REMOVAL PROCEDURE
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (With CH 48027) Fuel Pressure Relief (Without CH 48027).
2. Remove the fuel injector sight shield.
3. Disconnect the fuel feed pipe (2) quick connect fitting from the fuel rail.
4. Disconnect the evaporative emission (EVAP) pipe (3) quick connect fitting from the EVAP purge solenoid.
5. Cap the fuel rail and the EVAP purge solenoid in order to prevent possible fuel and/or EVAP system contamination.
6. Raise and support the vehicle. Refer to Vehicle Lifting.
7. Disconnect the fuel pump fuel feed pipe quick connect fitting (6) from the chassis fuel feed pipe.
8. Disconnect the EVAP canister vent front pipe quick connect fitting (5) from the chassis EVAP pipe.
