Acadia FWD V6-3.6L (2007)
9. Remove the fuel feed/EVAP pipe assembly clip (1) from the body.
10. Remove the fuel feed/EVAP pipe assembly clip nut (3) and clip (2) from the stud.
11. Loosen the fuel feed/EVAP pipe clip (4) bolt, and remove the fuel feed/EVAP pipe assembly from the vehicle.
INSTALLATION PROCEDURE
1. NOTE: Refer to Fastener Notice.
Position the fuel feed/EVAP pipe assembly to the vehicle, and tighten the fuel feed/EVAP pipe clip (4) bolt.
Tighten the bolt to 8 N.m (71 lb in).
2. Install the fuel feed/EVAP pipe clip (2) and nut (3) to the stud.
Tighten the nut to 9 N.m (80 lb in).
3. Install the fuel feed/EVAP pipe clip (1) to the body.
4. Connect the EVAP canister vent front pipe quick connect fitting (5) to the chassis EVAP pipe.
5. Connect the fuel pump fuel feed pipe quick connect fitting (6) to the chassis fuel feed pipe.
6. Lower the vehicle.
