gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

All Technical Service Bulletins for Body Control Module: > < Relay Replacement (Attached to Wire Harness)|Page 788
Page 1
background image

Body Control Module: Customer Interest
Body Controls - Doors Unlock When Shifting Into PARK

TECHNICAL

Bulletin No.: 07-08-64-014A

Date: March 22, 2010

Subject: Doors Unlock Automatically When Vehicle is Shifted into Park (Reprogram BCM)

Models:

2007-2010 GMC Acadia SLE Only
2007-2010 Saturn OUTLOOK XE Only

Supercede:
This bulletin is being revised to update the model years and the Correction information. Please discard Corporate Bulletin 07-08-64-014 (Section 08 -
Body and Accessories).

Condition

Some customers may comment that when the vehicle is shifted into PARK (P), the doors automatically unlock.

Cause

On these vehicles (base trim models SLE & XE), this is the factory default setting and is not selectable. This condition may not satisfy each particular
customer's personal preference.

Correction

Important
Be sure to select the correct calibration with the description that reads "Choose this calibration to disable Auto Door Unlock (use per customer
request for vehicles without DIC.").

For customers who wish to have the auto door unlock option disabled (all door locks will stay locked when shifted to park), a service calibration is
available. Reprogram the BCM using SPS. Be sure to complete all specific final instructions after programming.

Warranty Information

For vehicles repaired under warranty, use the table above.

Disclaimer

All Technical Service Bulletins for Body Control Module: > < Relay Replacement (Attached to Wire Harness)|Page 788